Flue Boost 350 Gas Fire Model

The Flueboost 350 Gas Fire model will handle flue gases at up to 300°C dependant on size and length of flue. The fan is suitable for fireplaces with a maximum constructional opening of 0.5m². Ideally the flue gas velocity should be between 2.5 - 4 m/s. Please contact us prior to purchase to confirm the recommended duct diameter most suitable for the installation.

Advantages of an Inline Fan
The ideal solution for listed buildings
No need for scaffolding/cherry picker to install or for service/repairs
Easy to maintain
Acoustic surround available to reduce noise levels
Can be located in loft/roof void/chimney stack so not an eyesore
Not open to the elements giving a longer lifespan

Connections
A plug-in electrical connector is supplied. This is multi-pin fitted with a six core number coded lead. Cable No.1: Grey - N/O. Cable No.2: Black - N/C. Cable No.3: Red - Common. Cable No.4: Brown - Motor Live. Cable No.5: Blue - Neutral Earth: Green/Yellow.

Installation and Maintenance
The unit can be fitted horizontally or vertically and located in a ceiling or roof void which allows easy access for maintenance.

Motor
The motor is variable speed and has an centrifugal rotor with secondary cooling impeller, Class F windings and maintenance free sealed ball bearings with adequate lubrication to ensure reliable operation for many years.

Pressure Switch
The unit features an approved fail-safe function (Gas Appliance Directive 2009/142/EC) which will cut off the gas supply in the event of fan failure or flue blockage.

Finish
The unit is constructed from mill finish grade 304 stainless steel.

Note
Please contact us if the unit is being installed with a sealed appliance.