HB60 Hydraulic Bonded Adhesive - 20Kg

Vitcas HB60 is a heat resistant adhesive designed for use in the construction of stoves, pizza ovens, tiled stoves and joining outdoor constructions, such as grills and fireplaces. It has a longer setting time which is easy to use and gives time to match elements. Perfect to render over the mesh used on construction boards before the application of Vitcas Heat Resistant Plaster. Ideal for use as a ‘dot and dab’ type adhesive with high temperature plasterboards, vermiculite boards and construction boards where the surface is not particularly flat. Heat-resistant to 750oC.

Application
After opening the bucket, mix the contents. Material should be mixed with cold tap water / approximately 200ml per kilo.
Mix in a clean, dry bucket using clean tools.
Surface should be clean, free of dust and residues of other materials.
The materials to be joined should be dry, except for plasterboards, vermiculite boards and construction boards which should be coated with PVA before fixing.
Do not use old and hard mortar or mix with new!
After application do not correct the position of the board or tile to be fixed, if necessary remove the previous material and apply the mortar again.
Setting time depends on the amount of water added and the temperature but the minimum working time is one hour.
The shelf life depends on the time that the bucket is open; when the work is complete close the bucket tightly.
Keep any unused material dry and store in a cool, dry place away from children, pets and frost.