KWPro - 175mm - Loft Mesh Kit (13-MESHKIT-175)

Loft Mesh Kit. The loft mesh kit is used to meet building regulations. Within the loft area the flue system must be boxed in or properly enclosed. This is in order to avoid combustible materials either being placed to close to or falling against the chimney. The system makes the installation very quick and safe, ensuring the required space around the flue. You can also retrofit this on an existing installation.

Contents
4 x Mesh Panels measuring 900mm x 350mm.
8 x Panel Fixing Clips.
1 x bottom Joist Support Clamp.
1 x top support clamp.

For use on solid fuel and gas/oil appliances. eg: woodstoves, gas coal effect fires, oil boiler and any solid fuel appliances.

KC is a high quality, multi-fuel, stainless steel twin wall chimney system designed for use with all solid fuel, wood, coal, gas, oil and pellet heating appliances. It is tested to a maximum operating temperature of 600°C and comes with a 25 year warranty.

KC has exceptional thermal properties which have allowed it to be classified as G60 in 175mm and 200mm internal diameters.

The 25mm high density mineral insulation is injected into the cavity of the chimney under high pressure; this improves the thermal efficiency of the system which in turn helps maintain constant and reliable flue performance.

The KC range has the largest selection of starting components of any chimney system available in the U.K. This enables you to complete the installation with the most aesthetically pleasing transition from stove to chimney possible.

KC is available off the shelf in black and stainless steel finishes.

Locking bands are included with each component as required; the standard locking band will provide lateral support for up to 1.9 metres of pipe above the final wall support. Structural locking bands are available and allow an additional metre height.

KC is suitable for installation on both dry and condensing appliance applications. (Silicone seals are required for condensing appliances).

175mm and 200mm Diameters - KC
Minimum 60mm to Combustibles - EN1856-1 T600 N1 D V2 L50040 G60.